HSH Aerospace Finishes specializes in the manufacturing of Water-Borne Coating Systems for the Aircraft Cabin Interior. We also offer products and solutions for trains and boats
HSH.Finishes.Coating.Water-Borne.Cabin Interior.Aerospace.trains.boats.filler.primer.Topcoat.clearcoat.degreaser.FAA/EASA.Certification.Aircraft Cabin Interiors.cost and time saving.FAR 25 853.CS 25 853.shortest lead-time.interplan.OEMs. Water based body filler.Thermo-formable Topcoat.In-Mold-Coating
page-template-default,page,page-id-15397,bridge-core-3.1.7,qi-blocks-1.2.9,qodef-gutenberg--no-touch,qodef-qi--no-touch,qi-addons-for-elementor-1.7.2,qode-page-transition-enabled,ajax_fade,page_not_loaded,,overlapping_content,qode-theme-ver-30.4.2,qode-theme-bridge,qode_header_in_grid,wpb-js-composer js-comp-ver-7.6,vc_responsive,elementor-default,elementor-kit-16260


IP100SQ – One Component Filler, Spray Quality

One of our specialty products is the One-Component IP100SQ Sprayable Filler.


This product is a time-saving solution to smooth surfaces, fill pinholes and little scratches before painting or laminate application.
In most cases, the spray-gun application is much quicker than with a spatula.
Also, this Filler can be sanded by hand.

The IP100SQ is qualified by several OEMs. It should be applied on top of our Primers.


Among the advantages of the IP100SQ are :


– Meet the requirements of the FAR/CS 25.853
– Extremely short drying time
– Odorless after a couple of minutes
– One component, no possible mixing errors. Add a little water and it’s ready for spraying
– No pot-life. The product left in the gun can be poured back in the can for use another time
– Spray guns can simply be rinsed with water after application
– No hardener, no thinner required
– Contains no Isocyanates
– Not considered Hazardous, no extra shipping costs


Lead time is 48 hours : the shortest in the industry.